RTOs must handle various tasks post-registration, such as annual declarations, AVETMISS reporting, and marketing compliance, but validation usually presents the biggest challenge.
Though we've written extensively on validation, let's clarify it again. ASQA describes it as a quality assessment review.
Validation involves verifying which areas of an RTO's assessment process are correct and highlighting where improvements are needed. Understanding its key components makes the task less intimidating.
According to SRTOs 2015 Clause 1.8, RTOs must ensure that their assessment systems, including RPL, comply with training package requirements and adhere to the Principles of Assessment and Rules of Evidence.
We are required by the standards to carry out two types of validation.
The first kind of assessment validation ensures your RTO's assessment adheres to the training package requirements within your scope.
The following validation type ensures that assessments follow the principles of assessment and rules of evidence.
This means we validate assessments both before and after they are conducted. This article will cover the first type—assessment tool validation.
A Look at the Two Types of Assessment Validation
A Deep Dive into Assessment Validation
As mentioned earlier and in one of our previous blog posts, validation is split into two stages: (1) assessment tool validation and (2) post-assessment validation.
Assessment tool validation, sometimes called pre-assessment validation, focuses on ensuring all unit requirements are met, in line with the first part of the clause, ensuring complete workbook compliance.
Post-assessment validation, in contrast, is about ensuring the implementation side, where Registered Training Organisations conduct assessments according to the Principles of Assessment and Rules of Evidence.
Here, we will concentrate on assessment tool validation.
How Assessment Tool Validation is Conducted
With a grasp of the two validation types, let’s focus on assessment tool validation.
Best Times to Conduct Assessment Tool Validation
The objective of assessment tool validation is to ensure that all elements, performance criteria, and performance and knowledge evidence are addressed by your assessment tools.
Thus, whenever new learning resources are purchased, assessment tool validation should be conducted before students use them.
You don't have to wait for the next validation schedule in your 5-year cycle. Validate new resources as soon as you get them to ensure they’re suitable for students.
However, there are additional reasons to conduct this type of validation. Perform assessment tool validation also when you:
- you update your resources
- add new training products on scope
- you review your course against training product updates
- identify your learning resources as a risk during your risk assessment
The Australian Skills Quality Authority employs a risk-based approach for regulating RTOs and expects regular risk assessments. Therefore, student complaints about learning resources are an ideal time to conduct assessment tool validation.
Training Products to Validate
It's crucial to remember this validation ensures compliance of all learning resources before they are used. All RTOs should validate resources for each unit.
Essential Resources for Assessment Tool Validation
Academic Resources
Given that you are conducting assessment tool validation, you will need the full array of your learning resources:
Mapping tool – the first document to check. It indicates which assessment items align with unit requirements, making validation faster.
Learner/student workbook – ensure it is suitable as an assessment tool during validation. Check if instructions are clear and answer fields are sufficient. This is a common issue.
Assessor guide/marking guide – ensure that instructions for assessors are sufficient and clear benchmarks for each assessment item exist. Clear benchmarks are essential for reliable assessment outcomes.
Other related resources – such as checklists, registers, and templates developed separately from the workbook and marking guide. Ensure they are suitable for the assessment task and address unit requirements.
Validation Committee
Clause 1.11 outlines the requirements for validation panel members, noting that validation can be done by one or more people. Typically, RTOs require all trainers and assessors to attend and may invite industry experts.
As a group, your validation panel must possess:
Relevant vocational competencies and industry skills applicable to the unit being validated
Up-to-date knowledge and skills related to vocational teaching and learning
Either of the following training and assessment credentials:
TAE40116 Certificate IV in Training and Assessment or the next version
Validation instrument/template
Having a validation tool helps you with both the validation process and documentation. Using a validation tool makes it easier to look at how each assessment item maps against each unit requirement.
Having a validation tool aids both the validation process and documentation. It simplifies seeing how each assessment item maps to each unit requirement.
At the same time, it can serve as your document evidence that you have validated your resources before letting the students use them.
Additionally, it serves as documented proof that you have validated your resources before student use.
ASQA does not provide a recommended or required template for assessment tool validation, but many templates are available online. These tools generally have validators review the tools as a whole to determine if they meet the principles of assessment.
Principles of Assessment Template Yes/No/Partially Comments
1. Fair
2. Flexible
3. Valid
4. Reliable
Though these templates make validation easier, they often result in judgment errors due to limited space for comments on each assessment item.
It is highly recommended to use a more detailed template for inspecting each unit requirement and the assessment items that map to them. Below is an example:
Element Performance Criteria Instructions for Assessment Benchmarks Assessment Tools Rectification Recommendations
What do you Need to Check?
What Needs Inspection?
As mentioned in our blog post Common Problems In Assessment Tools, you need to ensure that your assessment tools allow trainers to follow assessment principles and evidence rules.
Assessment Basic Principles
Fairness – Is get more info the assessment process equitable and accessible to everyone?
Flexibility – Does the assessment offer various options to demonstrate competence based on different needs and preferences?
Validity – Does the assessment evaluate what it is intended to evaluate? Is it a valid tool for assessing the required skill or knowledge?
Reliability – Will the assessment yield the same results each time, no matter who conducts the training? Will different assessors make consistent decisions on skill competence?
Evidence Basic Rules
Validity – Does the evidence indicate that the candidate possesses the skills, knowledge, and attributes described in the unit of competency and associated assessment requirements?
Sufficiency – Is there enough evidence to ensure that the learner has the skills and knowledge required?
Sufficiency – Is there sufficient evidence to ensure the learner has the required skills and knowledge?
Authenticity – Is the assessment tool proving that the work is the candidate’s own?
Currency – Do the assessment tools mirror current units of competency and modern industry practices?
Although these are often addressed in VET professional development and nationally recognised training, numerous tools fail to meet these requirements.
To prevent using learning resources that fail to address some unit requirements, ensure you follow these guidelines:
Be Consistent with Your Teachings
Pay attention to the verbs in the unit requirements and ensure they are addressed by the assessment item. For instance, in the unit CHCECE032 Nurture babies and toddlers, one performance evidence requirement requires students to:
Complete each of the following actions at least once with two different babies under 12 months old in a safe environment, using age-appropriate verbal and non-verbal communication as per service and regulatory requirements:
change nappies
bottle preparation, feeding babies from bottles, and cleaning equipment
solid food prep and feeding infants
respond properly to baby signs and cues
prepare infants for sleep and soothe them
monitor and foster age-appropriate physical exploration and gross motor skills
Having students describe the nappy-changing process for babies under 12 months old doesn’t directly meet the unit requirement. Unless the unit requirement is meant to assess underpinning knowledge (i.e., knowledge evidence), students should be performing the tasks.
Heed the Plurals!
Pay attention to the numbers. In our example on one of the unit requirements of CHCECE032, this single unit requirement calls for the students to complete the tasks at least once on two different babies under 12 months of age. Having students complete the tasks listed twice on just 1 baby won’t cut it.
Notice the numbers. In the CHCECE032 example, one unit requirement requires students to complete the tasks at least once with two different babies under 12 months old. Doing the tasks twice with one baby doesn’t meet the requirement.
All or Nothing
Pay attention to lists. As noted earlier, if students perform only half the tasks listed, it’s non-compliant. Each assessment item must address all requirements, or the student is not yet competent and the assessment tool is non-compliant.
Can you be more specific?
Can You Clarify Further?
Every assessment item must have clear and specific benchmark answers to guide the assessor’s judgment on student competence. Thus, make sure your instructions are not confusing for students or assessors. For example:
What kind of information can be included in a work package?
What information can be included in a work package?
The answer may include:
Needed materials
Pertinent costs
Time allocated for activities
Appointed roles and responsibilities
When an assessment item calls for several answers, indicate the number of answers required from a student. This way, your assessment remains reliable, and the evidence collected is valid.
This is true for assessment items with double-barrelled questions or questions requiring more than one answer at the same time. These can confuse students and assessors, as shown in the sample question below:
Name a hazard and/or environmental issue in the workplace and choose the most effective hazard control hierarchy.
Answers could include, but are not limited to:
Weather conditions – isolation of work area, engineering controls, personal protective equipment
Work area and ground conditions – eliminating hazards, isolation, use of engineering controls
People – isolation, use of engineering controls, administrative controls
Structural hazards – substitution, isolating, engineering controls
Chemical hazards – isolating, engineering controls, administration
Equipment or machinery – isolation, use of engineering controls, administration
Steering clear of double-barrelled questions makes it simpler for students to respond and for assessors to judge competence accurately.
Given these requirements, you might wonder, “Don’t learning resource developers offer audit guarantees?” But these guarantees require waiting for an audit before rectifying noncompliance. This impacts your compliance history, so it’s better to take a safe and compliant route.